TAGGED: aerodesign, baja, formula-sae, fsae, hyperloop
-
-
July 24, 2017 at 9:07 amvganoreAnsys Employee
Did you know that ANSYS provides FREE engineering simulation software for university based student teams participating in competitions such as Formula & BAJA SAE SAE (all type), Design Build Fly, Supermileage, Aero Design, Solar Challenge, Electronic Design Competition, Solar Splash, SpaceX Hyperloop Pod Design, Racing Aeolus, Human Powered Vehicle Challenge (HPVC) and many more?
Teams will be provided a package of ANSYS Academic Research and HPC Products to explore the power and performance of ANSYS structural, fluid, composites and electronics based simulations.
These products will enable the design of prototype/components such as suspension, steering system, brakes, roll cages, external aero systems, diffusers, intake manifolds, engine casings, composite structures and many more.
Interested teams can apply for this sponsorship by submitting the following application form:
-
March 20, 2018 at 11:43 pmAlphaCSubscriber
Maybe you should include AIAA's Design Build Fly , Baja SAE, Formula Hybrid, FSAE electric, SAE aero design, SAE supermileage?
-
March 21, 2018 at 11:30 amvganoreAnsys Employee
Good Feedback. ANSYS Offer is available for all the competitions that you listed. Just edited the information. Bottom-line is ANSYS software sponsorship is available for all university based student teams participating in any formal student competitions. Formal implies 3rd party oversight in term of administering the competition, design guidelines for teams, judging competition results etc
-
April 12, 2018 at 10:04 amShivanshVermaSubscriber
Sir I had applied for the sponsorship regarding the same on behalf of my team but we haven't had a reply from your side. We were wondering about how much time it is going to take regarding this.
-
May 7, 2018 at 12:23 pmvganoreAnsys Employee
Let me know your team's details. I will make sure you will get it ASAP.
-
September 14, 2018 at 10:37 pmjadia23sahilSubscriber
Sir, we are the official team of UPES, Dehradun for AIAA.DBF Competition. This is our second year of participation. I have filled the required form. Hoping for the favourable response.
-
October 28, 2018 at 6:11 pmDevesh444Subscriber
Sir, we are the official team of IIT Bombay making Autonomous Underwater Vehicle and we filled the form way back but didn't receive any reply for our ANSYS request. Please look into the matter
-
December 14, 2018 at 11:05 amvganoreAnsys Employee
Devesh, Looks like I have already approved your form and sent to our admin team for progressing the licenses. I hope you got the licenses now.
-
January 3, 2019 at 8:40 pmdhuaSubscriber
Hi, my high school is doing F1 In Schools and my academic license is limited as it does not allow the amount of faces the CAD models my other team members made. Can I still apply for this buisness license even if my team is in high school rather than university? Thanks.
Edit: Submitted a request for the buisness license. Could I ask how much the buisness license costs? I can't really find out anywhere online
-
January 4, 2019 at 2:41 pmRobAnsys Employee
If you've put an application in (look at the OP) someone will get back to you. If you've put in a separate request for commercial software please explain the situation when the account team get in contact: you don't want a commercial key!
-
January 4, 2019 at 7:34 pmdhuaSubscriber
When do you think they will get back to me? I just filled in the form OP posted. Would it work if I put in high school team information instead of college though?
-
January 7, 2019 at 9:07 pmdhuaSubscriber
Hi, is the offer still viable? I haven't gotten a response back in around 3 days. When should i expect it?
-
January 8, 2019 at 10:28 amvganoreAnsys Employee
Hi, I have forwarded your request to the licensing team. It is in the queue. You will soon be contacted for the machine information this week.
-
January 9, 2019 at 12:33 amdhuaSubscriber
Thanks!
-
January 19, 2019 at 4:10 pmdhuaSubscriber
Hi Vishal,
I still have not gotten a response back. Do you think it is too late now, or am I still in the queue?
-
January 24, 2019 at 11:40 amvganoreAnsys Employee
Dhua, I think you are recently contacted by our sales admin via email. He is currently waiting for license server/machine info. Please coordinate with him so that licenses can be released asap.
-
February 25, 2019 at 5:02 pmAshtaqSubscriber
Hi Vishal,
We have applied for the above mentioned support, and haven't received any response. Is it already off the table or available. FYI we are Formula Electric Team -
March 10, 2019 at 9:07 amkaustubhkSubscriber
Sir, My team has applied for this Sponsorship. We haven't received a reply from your side. When can we expect it?
-Team Coep
-
January 25, 2020 at 8:53 amMariosnacouziSubscriberHi Vishal Ganore We are a team competing in F1 in schools called Optimum F1 and have completed the application for a sponsorship a few months back but have not received a reply. We are a high school team but we believe that we can make use of Ansys Fluent, in order to optimise our design via adjoint optimisation methods, something we believe no other team in the national finals is currently doing.
-
January 26, 2020 at 3:50 amJOLLYSubscriber
Sir, My team has applied for this Sponsorship. We haven't received a reply from your side. When can we expect it?
-JOLLY
-
January 27, 2020 at 9:49 amRobAnsys Employee
I've prodded Vishal, but he's showing as out of office: I'll remind him again later this week.
-
January 27, 2020 at 12:36 pmvganoreAnsys Employee
Hi Jolly,
Could you please tell me the name of your college and date of submission? I will check the status and get back to you.
-
January 27, 2020 at 12:37 pmvganoreAnsys Employee
Hi Mariosnacouzi,
Could you please tell me the name of your college and the date of submission? I will check the status.
-
January 27, 2020 at 6:08 pmMariosnacouziSubscriberHi Vishal Ganore The name of our school is The English School, Nicosia and the date of submission was the sixth of December, 2019.
-
January 28, 2020 at 1:55 amJOLLYSubscriber
Hi Vishal Ganore, The name of our school is South China Agricultural University, and the date of submission was the fourth of Jan., 2020.
-
January 31, 2020 at 8:16 amvganoreAnsys Employee
Mariosnacouzi & Jolly, I have replied to both of you via email. Let us take it forward through email.
-
February 2, 2020 at 7:31 pmMariosnacouziSubscribervganore, I am afraid I have not received your email; could you inform me of your email address so that we can take it forward by email?
-
February 3, 2020 at 9:58 amRobAnsys Employee
Please double check the email address you're using on here.
-
February 5, 2020 at 7:04 pmMariosnacouziSubscriberDear Vishal Ganore I have checked the email address and it is indeed correct. I have hence changed the email address I use here. Could you reply to the new email address or inform me of your email address? My sincere apologies for the inconvenience.
-
February 13, 2020 at 3:38 pmfuhmSubscriber
Dear Vishal Ganore,
I am part of a student team who recently received the sponsorship. We have already verified our license through the "Installation Manager Release 2020 R1". We are experiencing problems finding the student portal(?) to download the products. It would be great if a link to the product download or the student portal(?) is provided. We kindly request your assistance. Thank you.
-
February 14, 2020 at 9:53 amMaruf016Subscriber
Sir,
I`ve tried to fill the application form. I used my institutional email address but it was showing invalid. What should I do now? Our Team Mentors also have the same format of email.
Thank you. -
January 29, 2021 at 9:07 amatharvastSubscriberHello Sir,nI've submitted the form on ANSYS website for SAE BAJA competition. We have not received a reply for further procedure until now.nTEAM GCOEA-Government College of Engineering Amravati.nn
-
January 29, 2021 at 10:18 amvganoreAnsys EmployeeAtharva, I can see that you have submitted the form today. Just approved. You will be contacted by our license admin within 5-7 working days. n
-
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Limitations of ANSYS Student
- When DesignModeler is a better choice than SpaceClaim
- Off setting lines onto surfaces
- Rosette direction issue due to Geometry limits
- Applying Moments for the Revolute Joints in Explicit Dynamics
- Free ANSYS Research software for Student Competition Teams
- Meshing Problem in Explicit Dynamic-Roll Cage
- workbench
- Ansys Composite prepost analysis
- Analysis of composite parts in student competition
-
7272
-
4248
-
2899
-
1374
-
1322
© 2025 Copyright ANSYS, Inc. All rights reserved.